Best viewed using:
Note: Video files require time to download, please be patient.
The photo below shows an N-scale SW9/1200 with our Rotating Beacon Simulator installed. The rotating beacon effect is quite bright. Notice the light reflecting off of the passenger car beside and the wood-chip car behind the switcher. LED intensity can easily be reduced by either increasing the size of the on-board resistor or adding an additional resistor on the common (anode) side of the LEDs. We left them bright because we like the effect. Click anywhere on the image below to start the video.
Note: This video is not enhanced or retouched and is taken with full room lighting.
© 2008 Ngineering